with “Touch Screen” display
“intelligent” with on screen results
Six Minute Walk Test
three phase print-out: baseline, walk and recovery
for home care symptom control
Complete Spirometer ATS/ERS compliant
The New Spirodoc® has been developed with great attention both to design and technology, with various operation modes: “advanced” parameters for the specialist, “reduced” set of parameters for screening as well as a “simplified” version for Home Care operation.
FVC, VC, IVC, MVV, PRE-POST. Precise spirometry interpretation including post bronchodilator. All tests are automatically memorized. Automatic BTPS conversion. Memory capacity: 10.000 tests. Wide selection of predicted values.
Spirometry requires maximum accuracy and hygiene. FlowMir® is the answer to both requirements. Each turbine is calibrated with a computerized system and it is packaged individually. After patient testing both the turbine and mouthpiece are thrown away. In this way 100% hygiene can be guaranteed.
Option available: reusable turbine
The accuracy and the precision of the reusable turbine remains unchanged even over time.
Intelligent Pulse Oximeter with on-screen results
Six Minute Walking Test
Day and Night
Simple, clear SpO2 and Pulse Rate measurements with plethysmographic curve.
A single six-minute walk test can be made and all results are shown directly on the display.
Innovative and essential in pneumology, cardiology and rehabilitation etc.
Spirodoc® carries out a sleep desaturation study and memorizes events.
Ideal for rehabilitation, telemedicine and clinical trials
Spirodoc® has all of these features.
Spirodoc® conforms to the EU guidelines for Telemedicine and COPD:
- respiratory function (spirometer)
- desaturation analysis (pulse oximeter)
- daily questionnaire (symptoms)
- physical activity (6MWT).
Respiratory rehabilitation and Activity Monitoring
According to the latest ATS COPD Guidelines, it is fundamental that, for patients with respiratory diseases, the level of exercise during the rehabilitation phase can be studied.
Home-care symptoms diary:
Fast on-screen symptoms entry. Complete touch screen with settable questions and automatic answer recording for homecare patient use (eDiary).
WinspiroPRO is a unique featured PC software, which comes standard with all MIR spirometers and oximeters.
The latest version provides an innovative user interface.
WinspiroPRO now available with HL7 interface
High performance PC software for spirometry and oximetry
All results can be rapidly printed.
All tests memorised in Spirodoc® are automatically downloaded into winspiroPRO and a patient data card is automatically created with a preview of the spirometry curve.
The spirometry incentive routine, patented by MIR, allows the user to select the patient’s favourite image in order to get maximum compliance.
WinspiroPRO can easily be connected to a database, EPR, hospital or occupational health system. Special edition with HL7 interface is available on request.
This software also gives trend graphs of any parameter, ideal for clinical trials and telemedicine.
All tests and curves for every patient in the memory can be reviewed on a single page and the results, including oximetry tests, can be compared.
Comprehensive patient records
Dynamic management of all data and graphs including SpO2 measurements during the corresponding test (6MWT, Sleep, Stress Test…).
Spirometer technical specifications
Flow sensor: bi-directional digital turbine
Flow range ±16L/s
Volume accuracy: ±3% o 50mL, whichever is greater
Flow accuracy: ±5% o 200mL/s, whichever is greater
Dynamic resistance at 12L/s: <0.5cmH2O/L/s
Temperature sensor: semiconductor (0-45°C)
Spirometer measured parameters
FVC, FEV1, FEV1/FVC%, FEV3, FEV3/FVC%, FEV6, FEV1/FEV6%, PEF, FEF25%, FEF50%, FEF75%, FEF25%-75%, FET, Estimated Lung Age, Extr. Vol., FIVC, FIV1, FIV1/FIVC%, PIF, VC, IVC, IC, ERV, FEV1/ VC%, VT, VE, Rf, ti, te, ti/t-tot, VT/ti, MVV measured, MVV calculated
Central unit technical specifications
Display: LCD Backlit Touch screen display
Resolution: 128×64 pixels
Power supply: Lithium ion 3.7V, 1100mA rechargeable battery with 30 hours measurement back-up
Data transmission: USB 2.0 (Bluetooth® optional)
Dimensions and weight: central unit 101x48x16mm, 99g removable turbine head: 46x47x24mm, 17g
Battery charger (optional): 100VAC – 240VAC, 50Hz-60Hz output 5VDC, 500mA, micro USB type B
Pulse-oximeter technical specifications
SpO2 range: 0-100%
SpO2 accuracy: ±2% (50-100% SpO2)
Pulse rate range: 20-254BPM
Heart rate accuracy: ±2BPM or 2%, whichever is greater
Pulse-oximeter measured parameters (standard)
SpO2 [Baseline, Min, Max, Mean], Pulse rate [Baseline, Min, Max, Mean], T90% [SpO2<90%], T89% [SpO2<89%], T88% [SpO2<88%], T5% [ΔSpO2>5%], ΔIndex [12s], SpO2 Events, Pulse rate events [Bradycardia, Tachycardia], Recording time, Analysis time
Sleep analysis (specific parameters)
SpO2 Events, Desaturation index (ODI), Desaturation [Mean Value, Mean duration, Longest duration, Nadir Peak], ΔSpO2 [Min Drop, Max Drop], Total Pulse Variations, Pulse Rate Index, NOD89% [SpO2<89%; >5min], NOD4% [SpO2 Basale-4%; >5min], NOD90% [SpO2<90%; Nadir<86%; >5min]
6MWT (6 Minute Walk Test specific parameters)
Distance walked, Predicted distance [Min, Standard], TΔ2% [SpO2≥2%], TΔ4% [ΔSpO2≥4%], Time [Rest, Walking, Recovery], Desaturation Area/Distance
Optional data entry: Borg Dyspnea [Baseline, End, Change], Borg Fatigue [Baseline, End, Change], Arterial blood pressure [Systolic, Diastolic], Oxygen administered